Inverters · Hardware

Inverters for electric drives – from the 48 V ESC to the GaN inverter with 99 % efficiency

Three inverters for three jobs, one common base: field-oriented control, CAN telemetry, integrated protection. Developed and manufactured in Regensburg, Germany – and adaptable to your application, hardware and firmware alike.

The models

Three inverters, three jobs.

From Muon, the compact 48 V inverter for drones and robotics, to Neutrino, the GaN inverter for long-endurance flight, and Electron, the new class for the smallest installation spaces.

Muon Aero drone variant: board stack with aluminium heatsink, three phase cables and DC cables

48 V class · 7.5 kW

Muon

The compact inverter for drives from 17 to 60 V: 7.5 kW continuous power at 60 V without a fan, 120 A continuous phase current (rms), 337 g as housed industrial variant, 108 g as drone variant (Aero). Field-oriented control, PersyCAN and DroneCAN, PWM/PPM – for multicopters, VTOL, robotics and mobile machinery.

Neutrino: black housing with cooling fins and five connectors

GaN · maximum efficiency

Neutrino

Six GaN half-bridges arranged as three full bridges for a motor with open windings: up to 120 V, 40 A phase current (rms), 99.125 % efficiency. Developed for a HAPS platform that stays airborne for 90 days at a time.

In development

Electron

Low voltage, high current, minimal footprint: 25 V and 100 A phase current in a housing for drives that no inverter could fit into before. Currently in development – talk to us if your project falls into this class.

ModelVoltagePhase currentPower stageDesign focusStatus
Muon17–60 V120 A rms continuous, 163 A rms for 180 sthree half-bridges, MOSFET, 50 kHz PWM7.5 kW continuous at 60 V, three variants (337 / 154 / 108 g), air-cooled without a fanavailable
Neutrinoup to 120 V40 A rmssix GaN half-bridges as three full bridgesmaximum efficiency (99.125 %), 90-day continuous operationavailable
Electron25 V100 A–minimal installation spacein development

Common base

One firmware, one workshop, one test bench.


Field-oriented control

Speed and torque control with an inner Id/Iq current loop, rotor position sensorless or from an encoder. The same control in every inverter – parameterized for motor and operating point. Background on control and drive design can be found in our guides.


CAN and telemetry

PersyCAN for setpoints, parameters, telemetry and firmware updates; DroneCAN for flight controllers. Operating data arrives cyclically on the bus, without polling.


Protection and diagnostics

Overcurrent, overtemperature, undervoltage, monitoring of the input signals, fault log over CAN. What happens in the drive can be traced.


Measured, not estimated

Every inverter goes through our test bench in Regensburg: power analyzer, torque transducer, CAN logging. And the models that OverDrive computes with describe the inverters we build.

Custom development

When the standard variant does not fit.

That is exactly how the Neutrino came about: a customer needed a drive that runs for 90 days without maintenance in the stratosphere – on an energy budget where every watt counts. We designed inverter and motor together for this operating point.

We take the same approach when your application calls for other voltages, currents, interfaces or installation spaces: hardware and firmware from one source, from the first sample to series production. From 2027, the dual-core concept also lets your own logic run directly on the inverter.

How a project runs

Requirementsvoltage, current, operating points, interfaces, installation space, environment
Designsimulation of motor, inverter and control with OverDrive
Sampleshardware and firmware, commissioning on your motor
Test benchefficiency, thermal behavior, endurance run – with test report
Seriesproduction in Regensburg, documentation, support

Contact

Which inverter fits your drive?

Tell us voltage, power and interface – you will get an answer straight from engineering, usually on the same business day.

ModelsMuon · Neutrino · Electron (in development)
DatasheetsDownloads
Documentationesc.persystems.org
Salessales@persystems.com
Phone+49 941 462 974 40
Persystems

Echtzeit-Simulation und Leistungselektronik für elektrische Antriebe – entwickelt und gefertigt in Regensburg.

Persystems GmbH
Franz-Mayer-Straße 1 · 93053 Regensburg
info@persystems.com · +49 941 462 974 40

© 2026 Persystems GmbHPLECS, LTspice, Simulink, CarMaker und DroneCAN sind Marken ihrer jeweiligen Inhaber.
Persystems

Real-time simulation and power electronics for electric drives – developed and manufactured in Regensburg, Germany.

Persystems GmbH
Franz-Mayer-Straße 1 · 93053 Regensburg · Germany
info@persystems.com · +49 941 462 974 40

© 2026 Persystems GmbHPLECS, LTspice, Simulink, CarMaker and DroneCAN are trademarks of their respective owners.